Pico Macom PRRSeries Manual de instrucciones descargar pdf (Pagina 8)

www.picomacom.com

PICO MACOM

Fiber Optic

Series

Chapter 2

Speciﬁcations

1. RF Performance

SPECIFICATION LIMITS

Frequency Range 5 to 200 MHz

Connector F-connector, female

Impedance 75 ohm

Output Return Loss > 8 dB

Output RF Level > 45 dBmV

RF Output Control Range > 10 dB

RF Frequency Response (Flatness) + 1.5 dB

Carrier–to-Noise Ratio > 50 dBc*

Composite Second Order (CSO) > 60 dBc*

Composite Triple Beat (CTB) > 65 dBc*

Rear Panel Test Port Level -20 dB from primary output, typ.

* Results typical, based 0 dBm Optical Return Receiver input level.

2. Optical Performance

SPECIFICATION LIMITS

Wavelength 1290-1600 nm.

Input Level -2 to +1 dBm

Output Connector SC/APC (FC/APC optional)

Return Loss > 45 dB

3. General

SPECIFICATION LIMITS

Input Power 90 VAC to 264 VAC at 47 Hz to 63 Hz, 30 watt typ.

Power Cord

Standard: NEMA 15P to IEC320 male on chassis.

Special order possible

Fuse 5MF 500/250V (BEL) (spare in IEC320 socket)

Temperature Range -10 to +50°C (+40°C max. recommended)

Relative Humidity (non-condensing) 0 to 95%

Altitude 0 to 15,000 ft

Weight PRR-1: 7.2 lb.| PRR-2: 7.5 lb. | PRR-4: 8.2 lb.

Size: 1 RU (1.75”)H x 19”W x 13”D

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Pico Macom PRRSeries Manual de instrucciones Pagina 8